HAUSER 2000

The new Hauser™ 2000, the successor to the H35-400 model, is a universal jig grinder with proven technical features such as automatic taper grinding, automatic grinding tool changer (ATC) and automatic pallet changer (APC). It can be expanded easily to an autonomous grinding unit. The Hauser 2000 not only meets the demand of the market for combined grinding and hard milling on a single jig grinder, but also enables further improvements in machining precision to meet future requirements. The main technical feature is the dual-frame design, which significantly increases the rigidity of the grinder and therefore ensures even higher precision. In this box-type design, the machining head is positioned centrally within the machine frame, thus enabling machining forces to be optimally controlled. Almost no transverse forces are created – the prerequisite for ultra-high geometric precision machining. Since the tool machining point is located at the center of the machine, practically all thermal expansion effects are eliminated.

With higher dynamic axis movements and significantly greater rigidity, the Hauser 2000 gives the best possible conditions for finishing with hard precision milling.The overall result is a significant increase in productivity not only for the ultra-precise grinding processes on the machine but also for hard milling.


TECHNICAL DATA
HAUSER 2000
Work range
Range of adjustment X, Y 550 x 300 mm
Vertical adjustment of grinding head (W) 450 mm
Clearance between table top and U-axis reception face grinding motors 745 mm max.
Clearance between table top and grinding motor reception nose (70HS) 0-550 mm
Diameter ground in planetary mode, with grinding wheel Ø 50 mm/70S:
grinding motor 70S in U-axis center position, automatic grinding mode 144 mm (max.)
grinding motor 70S with extension plates, semi-automatic mode 360 mm (max.)
Diameter ground in planetary mode, with grinding wheel Ø 100 mm/40S:
grinding motor 40S in U-axis center position, automatic grinding mode 194 mm (max.)
grinding motor 40S with extension plates, semi-automatic mode 360 mm (max.)
Taper grinding, included angle, divergent and convergent (Option) 120 degree max.
Table
Working surface 650 x 432 mm
6 T-slots, width 10 mm
Permissible table load 300 kg max.
Feeds
Table and saddle X, Y:
Machining speed 0-4’000 mm/min
Traversing speed 8’000 mm/min
Grinding spindle Z, C, U
Diameter of the spindle sleeve 125 mm
Basic machine is prepared for use of the following grinding spindle speeds:
for electric grinding motor 40S, infinitely adjustable & programmable 4’000-40’000 min-1
for electric grinding motor 70S, infinitely adjustable & programmable 9’000-70’000 min-1
System to activate grinding turbine T13 up to 150’000 min-1
C-axis planetary mode:
Planetary mode, infinitely adjustable and programmable 1-350 min-1
C-axis follow-up mode, AC servo drive up to 10 min-1
Z-axis in alternating stroke mode:
Z-alternating stroke movement, infinitely adjustable Vmin. 0,500 mm/min
Z-alternating stroke movement, infinitely adjustable Vmax. 26’000 mm/min
Z-stroke frequency 10 Hz max.
Z-stroke length, infinitely adjustable 0.1 up to 170 mm
U-axis radial travel capacity (in CNC-mode) von –3 up to +47 mm